1. SeaShield 500 System

Uses
Extra heavy duty encapsulation system for steel, concrete and timber jetty piles, bridge supports, offshore riser pipes and conductors.

SeaShield Series 500 System comprises the SeaShield Fibre-Form Jacket and SeaShield 550 Epoxy Grout. The system can be applied above and/or below water with inexpensive pumping equipment or poured into the pile jacket. The Series 500 system is tough, durable and provides the ultimate protection to restore steel, concrete and timber piles.

The New SeaShield 500 System is comprised of a fibre-form jacket which is a high quality formulation Fibreglass Reinforced Plastic (FRP) and SeaShield 550 Epoxy Grout.

The Fibre-Form Jacket is provided with a vertical closure and is available in a range of thicknesses. Non-corrosive standoffs (grout-spacers) can be used inside the jacket to maintain proper spacing around the piling when pumping or pouring the SeaShield 550 Epoxy Grout.

2. Rigspray

Uses
Rigspray has been designed specifically for the long term protection of steel structures exposed to corrosive marine environments. It is ideally suited for the use in the oil industry on offshore structures in areas such as splash zones, underdeck areas, riser pipes and, with the simple introduction of a non-slip element, it is ideally suited for helidecks, main deck surfaces and all areas subject to extreme mechanical damage and erosion.

The one-coat polyester coating which offers the traditional characteristics of glass flake reinforced systems with additional benefits. This enhanced material can be applied by airless spray to achieve a dry film thickness of 750-1000 microns in a single coat.

Rigspray is a product of the company’s continuing research and development program and has been produced in our laboratories for use with hot sea water and oil. Samples of this lining which were immersed in sea water at 100°C were unaffected after 6 months with no loss of hardness, gloss or bond to the substrate.